• Input: Single-phase 110-230-277 Vac
  • Output Load: 24V 25A/ 48V 12.5A
  • Battery output: 24V 25A/ 48V 12.5A
  • Ethernet: SNMP V3, Modbus TCP/IP, HTTPS
  • Proteção IP20 (EN/IEC 60529)
com IVA
206.64€

sem IVA
168.00€
Sku: CBI60024A
Tipo de Produto: Fontes DC-UPS
Fabricante: ADELSYSTEM

CBI60024A

Fonte DC-UPS All In One com Modbus TCP/IP, SNMP e HTTPS, 24V 25A

  • Input voltage: single-phase:
    • 110 Vac add Bridge connection
    • 230 Vac no Bridge connection
  • Load output:
    • 24 Vdc 25 A
    • 48 Vdc 12.5 A
  • Battery output:
    • 24 Vdc 25 A
    • 48 Vdc 12.5 A
  • “All In One” solution: power supply + battery charger + backup module in one single device connected directly to the mains
  • Suited for different battery types: Open Lead Acid, Sealed Lead Acid, AGM and Gel Lead Acid; Ni-Cd and Li-ion. 5-stage IUoU (Bulk, Absorption, Float, Refresh Battery) plus Recovery stage for deeply discharged batteries
  • Automatic diagnosis of battery status and battery Life Test function (Battery Care)
  • Switching technology with high efficiency
  • Protected against short circuit, overload and inverted polarity
  • Dry output contacts for signaling Low Battery or Battery Replacement, Faulty system and charger or rectifier failure
  • IP20 protection degree
  • Space saving on DIN rail and wall mount
 
Especificações
CBI60W-series

The CBI60W series with integrated Ethernet SNMP, Modbus TCP/IP and HTTPS protocols is the new DC-UPS All In One module with output voltages of 12V or 24V.
The design of the modules follow the same reliable performance of the actual DC-UPS CBI All In One Line.

The CBI60W Series All In One is composed by:

  • Power Supply
  • Backup Module
  • Battery Charger
  • Battery Tester

 The CBI60W Series has based on Battery Care technology by Adelsystem:

  • Specific battery charging profiles (Lead Acid, AGM, GEL, NiCd, NiMh, Li-Ion and LiFePO4);
  • Temperature compensation charge;
  • Deep discharge protection;
  • Charging current limiter;
  • Battery tester (battery connection, reverse polarity, cells in short circuit, bad internal impedance);
  • Battery state of health monitoring
 
 
Esquema_CBI60W

ETHERNET Integration for remote monitoring

The Ethernet SNMP, Modbus TCP/IP and HTTPS interfaces allows the users to access to internal DC-UPS parameters remotely trough IoT equipment. A number of important operating parameters are sent on real-time. The interface allows to:

  • Monitor parameters;
  • Configure of parameters;
  • Log events and data;
  • Receive alarm notification.

For example, the operator can monitor remotely on real-time following parameters:

  • AC Input voltage;
  • DC Output load voltage, current, power and Output load state;
  • Battery voltage, current and internal resistance
  • Receive alarms about mains, device and battery failures.

Based on the received data, the user can improve system efficiency and optimize at best the energy consumption of the system.

 
CONFIGURATION_CBI60W

Internal WEBSERVER

The CBI60W Series has its own internal webserver with the possibility to connect by using their IP Address.

Using the IP Address, the user will manage the configuration of the DC-UPS through Adelviewsystem interface.

 
 
Adelsystem-Webserver

Load switch and Relay configuration

The load output is totally configurable and the CBI60W Series allows the user to enable and disable the output load based on the type of application.

• Switch OFF the load through a command via Webserver or external push button

• Switch OFF the load as soon as the AC Mains is present

• Switch ON the load as soon as the AC Mains fails (emergency lighting)

• Power the load for a specified period of time

• Power the load for a cyclic operation, load turns off and on cyclically and autonomously according to configured timings

• Possibility of connecting load activation to an external push button

 

The Relay contacts can be freely configured according to the user's needs. It is possible to configure:

• Fault Relay

• AC Mains Relay

• Rectifier Relay

• Buzzer acoustic alarm

 
CBI60W-Multicolor-Led

Multicolor Led

The CBI60W series has been integrated with multicolor LEDs and an acoustic alarm to easily and quickly recognize critical situations inside the panel.

 
Downloads

Entrega Normal | 5 a 7 dias úteis

Entrega Urgente | 3 a 5 dias úteis

*salvo rutura de stock

Trabalhamos intensamente cumprir os prazos de entrega anunciados. No entanto, enfrentamos uma escassez global relativamente a alguns componentes e fabricantes.
Em caso de dúvidas ou preocupações, entre em contacto connosco para garantir o tempo de entrega.
Poderemos aconselhar sobre a disponibilidade de hardware alternativo e fornecer recomendações de componentes disponíveis para opções de envio mais rápidas.