Panel PC 21.5' P210-11KS-7600U (Kaby Lake i7-7600 4M, 3.90 GHz)

Panel PC 21.5' com processador Intel® Kaby Lake i7-7600

P210-11KS

• LCD TFT 21.5" com 30,000 horas de vida útil
• Proteção IP65 frontal, design fanless
• Slim Panel PC PCAP touch
• Processadores de 7ª Ger. Intel® Core-I

P210-11KS is a 21.5 inch all in one panel PC system with Intel Apollo Lake based platform for power-efficiency and fanless condition.

For different industrial touch application, it is also flexible to support either resistive touch or capacitive touch solution followed by IP65 protection rating in front.

All of these are aiming to provide the most stable and reliable product solution for different environmental or industrial HMI applications.

Powerful Kaby Lake Processor

2.18X Performance Improvement
(CPU Passmark)

Power Consumption Reduction

Low Power Consumption & Fanless Design

CORE-I

Fanless Design

Slient & stable 24-7 long term opertation

Slim & Sleek Design

Display & Touch

P-cap Multi Touch

Scratch resistance: 7H

FHD 16:9 natural viewing experience

Sunlight Readable Display

Triple Display

Support triple independent displays(VGA, HDMI, DP). The HDMI & DisplayPort up to 4K high resolution. The enhance visual quality responses the demand of being high precise.

DisplayPort 1.2   4K@60Hz

HDMI 1.4   4K@30Hz

0 ∼ 50ºC Wide Temperature

P series Panel PC is design for fan-less application in extreme temperature condition from 0ºC to 50ºC

IP65 Dust & Water proof

Front IP65

Sealing to prevent dust even protected against splash of waters

(within certain limits)

Rich I/O

Advanced Power Protection

Wide Power Range

8V ∼ 24V

Protection

ESD Protection: +/-8kV (air), +/- 4kV (contact)
Surge Immunity: 2kV

Mounting Design

STEP 1

• Make a cutout on the fixture (ex. wall) according to the cutout Dimensions of the Panel PC

STEP 2

• Place the Panel PC on the fixture from the front side
• The sides of the bezel should be visible from outside

STEP 3

• Use mounting kit to secure the Panel PC to the fixture
• First install mounting clamp to the Panel PC, and then fasten the screw to fix the clamp to the fixture

STEP 4

• Installation complete