DC-UPS CBI6024A All In One Ethernet (Inp 110-277VAC Out 24V 2.5A)
CBI6024A
All In One DC-UPS with Ethernet input: ModBus TCP/IP and SNMP, 110-277Vac, 24V 2.5A output
- Input: single-phase 115 - 230 - 277 Vac
- Selectable output load: 24 Vdc 2.5A
- Output battery charging: 24 Vdc 2.5A
- Suitable for the following battery types: Open Lead Acid, Sealed Lead Acid, Lead Gel, Li-Ion and Ni-Cd
- Automatic battery status diagnostics, Battery Life Test function (internal battery impedance)
- IUoU charging curve, constant voltage
- Four charging levels: Boost, Bulk, Trickle, Recovery
- Protected against short circuits and reverse polarity
- Signal output: battery fault, mains or Back-UP
- Ethernet: SNMP V3, Modbus TCP/IP, HTTPS
- DIN rail and wall mounting
The CBI60W series, with integrated Ethernet SNMP, Modbus TCP/IP and HTTPS protocols, is the new DC-UPS All In One module with output voltages of 12V or 24V.
The module design delivers the same reliable performance as the current DC-UPS CBI All In One line.
The CBI60W All In One series comprises:
- Power Supply
- Backup Module
- Battery Charger
- Battery Tester
The CBI60W series is based on Adelsystem Battery Care technology:
- Specific battery charging profiles (Lead Acid, AGM, GEL, NiCd, NiMh, Li-Ion and LiFePO4);
- Temperature-compensated charging;
- Deep discharge protection;
- Charging current limiter;
- Battery tester (battery connection, reverse polarity, short-circuited cells, poor internal impedance);
- Battery state-of-health monitoring
ETHERNET integration for remote monitoring
The Ethernet SNMP, Modbus TCP/IP and HTTPS interfaces allow users to remotely access internal DC-UPS parameters through IoT equipment. A number of important operating parameters are transmitted in real time. The interface allows users to:
- Monitor parameters;
- Configure parameters;
- Log events and data;
- Receive alarm notifications.
For example, the operator can remotely monitor the following parameters in real time:
- AC input voltage;
- DC output load voltage, current and power, and output load state;
- Battery voltage, current and internal resistance
- Receive alarms concerning mains, device and battery failures.
Based on the received data, the user can improve system efficiency and optimize the system's energy consumption as effectively as possible.
Internal WEBSERVER
The CBI60W series has its own internal webserver, which can be accessed using its IP address.
Using the IP address, the user can manage the DC-UPS configuration through the Adelviewsystem interface.
Load switch and relay configuration
The load output is fully configurable, and the CBI60W series allows the user to enable or disable the output load according to the application type.
• Switch OFF the load using a command issued through the webserver or an external push button
• Switch OFF the load as soon as AC mains power is present
• Switch ON the load as soon as AC mains power fails (emergency lighting)
• Power the load for a specified period of time
• Power the load in cyclic operation; the load switches off and on cyclically and autonomously according to the configured timings
• Option to connect load activation to an external push button
The relay contacts can be freely configured according to the user's requirements. The following can be configured:
• Fault relay
• AC mains relay
• Rectifier relay
• Buzzer acoustic alarm
Multicolor LED
The CBI60W series incorporates multicolour LEDs and an acoustic alarm for quick and easy recognition of critical conditions inside the panel.
Functional diagram
CBI60W
The CBI60W series, with integrated Ethernet SNMP, Modbus TCP and HTTPS protocols, can be connected to gateways and switches, providing easy access to battery status, DC-UPS functions and all application data.
The new DC-UPS line with Ethernet interface is composed of two models: CBI6012A (12V 5A) and CBI6024 (24V 2.5A) with 1 Phase AC Input (90-305VAC).
These models are Protection Class II and are also designed for building automation applications.
They use microcontroller-based switching technology to optimise accumulator charging and discharging times without deep discharge, provide uninterrupted switching from the battery to the charger, and offer automatic fuse-free protection against reverse polarity, short circuit, overload and overvoltage.
The CBI60W series provides different charging profiles for Lead Acid, AGM, GEL, NiCd, NiMh, Li-Ion and LiFePO4 battery technologies.
