AMRC-ORN
Nvidia Orin NX SOM Module Box PC for Robot Control
• Based on the NVIDIA Jetson Orin NX 8G/16G DDR SOM module
• Provides an M.2 M key 2280 slot with PCIe Gen3 x4 signal
• M12 X-coded Gigabit Ethernet port x 3
• CAN FD interface with isolation x 2
• 7-channel time synchronization output for external sensors
• GMSL2 camera FAKRA Z-code interface with frame synchronization x 4
• HMTD Base-T1 Ethernet port for solid-state 3D LiDAR x 4/8, radar, and camera
| Processor | NVIDIA Jetson Orin NX 8G/16G DDR SOM module |
| GPU Capacity | ONX16GB: 1024 NVIDIA CUDA cores, 32 Tensor cores, 918MHz ONX 8GB: 1024 NVIDIA CUDA cores, 32 Tensor cores, 765MHz |
| CPU | ONX 16GB: Eight-core Cortex A78AE ARMv8.2, 64-bit ONX 8GB: Six-core Cortex A78AE ARMv8.2, 64-bit |
| AI Performance | ONX 16GB: Up to 100(Sparse) INT8 TOPS and 50(Dense) INT8 TOPS ONX 8GB: Up to 70(Sparse) INT8 TOPS and 35(Dense) INT8 TOPS |
| Deep Learning Acceleration | ONX 16G: 2x NVDLA, maximum frequency up to 614MHz, 20 TOPS (Sparse INT8) ONX 8G: 1x NVDLA, maximum frequency up to 610MHz, 20 TOPS (Sparse INT8) |
| Internal Memory | NX 16GB: 16GB 128-bit LPDDR5 DRAM, 102GB/s ONX 8GB: 8GB 128-bit LPDDR5 DRAM, 102GB/s |
| M12X-Coded | M12 X-coded GbE Ethernet ports x 3 |
| HDMI Interface | HDMI 2.0a/b x 1 |
| USB Port | USB 3.2 Gen1 Type-A x 4 |
| ANT 1/2 | FAKRA C-code connector for Wi-Fi x 2 |
| 48pin CMC Lockable Connector | Multi-channel interface for robotics: 4pin 9-36VDC ignition power input, 1x ACC trigger input for power-on Microphone input x1, speaker output with 10W amplifier x1 PWM GPIO, 2x CAN H/L interface with isolation x3 FAN control output x 1, RS232(TXD/RXD/CTS/RTS) x 1 1x Recovery, 1x Reset, 1x PWR_BTN |
| 32pin CMC Lockable Connector | PPS + ToD synchronization output for external sensors x7 12V/3.5A power output for external sensors x2 |
| FAKRA Z Code (Left Side) | GMSL 2 camera FAKRA Z-code interface with frame synchronization x 4 |
| GSM Radio 1/2/3 | Max. FAKRA D-coded connector for 4G/5G x 3 |
| HMTD 1/2 | 1G Base-T1 Ethernet ports x 8 |
| USB OTG | micro-USB for BSP recovery x 1 |
| Ignition Feature | Power-on delay: 10 sec (default) Power-off delay: 3 min (default) |
| Input Power Range | 9-36Vdc± 5% |
| Power Consumption | 100W (full load) ONX 8G/16G SOM module: default 20W Thermal dissipation: passive (default), active (optional) |
| Enclosure | IP40 Design, Aluminum |
| Dimensions (mm) | 186 x 140 x 86mm (7.32 x 5.51 x 3.385 in) |
| Mounting / Installation | Wall Mount |
| Operating Temperature | -20°C to 60°C (-4°F to 140°F) |
| Operating Humidity | Approx. 95% @40 (non-condensing) |
| Storage Temperature | -40 to 85°C (-40°F to 185°F) |
| Vibration | IEC 60068-2-64: 5Grms, 5-500Hz, 3 axes |
| Shock | Operating: 3G, half-sine, 11ms duration |
| EMI | CE (EN 55032, EN 55035) & FCC Class A (ANSI C63.4, 4a) |
| EMS (TBC) | IEC 61000-4-2 ESD: ± 15kV air, ± 8kV contact IEC 61000-4-3 RS: 80M~1000MHz, 3V/m(rms), 80% AM (1kHz) IEC 61000-4-4 EFT: power port ± 1KV, data port ± 0.5kV IEC 61000-4-5 Surge: power port L-L ± 1kV, L-G ± 4kV, data port ± 4kV IEC 61000-4-6 CS: 0.15M~10MHz 3Vrms, 10M~30MHz 3-1Vrms, 30M~80M 1Vrms 80% AM 1kHz IEC 61000-4-8 PFMF: 50/60Hz, 1A/m |
| Warranty | 2 Years |